Extra 300LT - Head Lamp; Landing Light Power Supply

CHAPTER 33
PAGE 10
PAGE DATE: 7. July 2010
MAINTENANCE MANUAL EXTRA 300LT
33-40-22 Head Lamp
Removal/Installation
1 Remove landing light as per Chapter 33-40-21.
2 Remove the attachment bolts (5).
3 Remove the head lamp (6) from the hood (10).
4 Install in reverse sequence of removal.
33-40-23 Landing Light Power Supply
Removal/Installation
1 BATTERY switch OFF.
2 Remove engine cowlings as per Chapter 71.
3 Disconnect the plugs (13, 14) from the power supply (2).
4 Remove the attachment bolts (12) and remove the power
supply (2).
5 Install in reverse sequence of removal.