EasyManua.ls Logo

Extra 300LT - Seat Belts; Strap Assembly

Extra 300LT
551 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 25
PAGE 5
PAGE DATE: 7. July 2010
MAINTENANCE MANUAL EXTRA 300LT
FLIGHT COMPARTMENTS
25-10-03 Seat Belts
(Refer to figure 1) Each seat is equipped with a special
aerobatic seat belt/shoulder harnesses from the manufac-
turer "Hooker custom Harness". Such an assembly of straps
consists of a right and left shoulder harness, two right and
two left seat belts and a crotch strap.
Figure 1 Strap Assembly
IMPORTANT Keep belts from contact with chemicals, solvents,
degreaser, battery acid and excessive exposure to direct
sunlight.
Installation
Each strap end is fitted with bolts, stop nuts and washers to
its own fitting at the steel frame resp. at the underside of the
seat.
The shoulder strap loops of the front and rear seat are
attached to the horizontal steel tubes as shown in figure 2.
Seat belts

Table of Contents

Other manuals for Extra 300LT

Related product manuals