Operating manual.
CNC 8060
CNC 8065
PROFILE EDITOR
11.
Define a new profile, enlarge an existing one or import one from a file.
·209·
(REF: 1807)
11.2.1 Define any profile using straight and curved sections.
For any element of the profile, the softkey menu may be used to define the data in Cartesian
or Polar coordinates as well as in absolute or incremental coordinates. The softkeys for these
options are only available when allowed by the selected data.
Define the starting point of the profile.
The starting point may be edited both in Cartesian and Polar coordinates, but always in
absolute coordinates.
Define a straight section of the profile.
The end point of the section may be edited both in Cartesian and Polar coordinates as well
as in absolute or incremental coordinates. Being the incremental coordinates active, the
editor will show the symbol
next to the affected data.
Cartesian coordinates.
The data definition area shows the following data.
Polar coordinates.
The data definition area shows the following data.
Define a curved section (clockwise or counterclockwise) of the
profile.
The end point and the center of the section may be edited both in Cartesian and Polar
coordinates as well as in absolute or incremental coordinates. Both points may have different
types of coordinates and, besides, when using Polar coordinates, both points may have a
Softkey. Meaning.
Cartesian
Polar
Softkey to select either Cartesian or Polar coordinates.
ABS
INC
Softkey to select either absolute or incremental coordinates. Being the
incremental coordinates active, the editor will show the symbol next to the
affected data.
Polar origin Softkey to define the Polar origin.
Direction Direction of the profile; clockwise or counterclockwise.
Validate Validate the profile defined.
When selecting a new profile, the starting point must always be defined first. Once the
profile's starting point has been defined, the softkey menu will show the necessary options
to define the profile. To return to the main menu, press the [BACK] key.
Data. Information
X1, Y1 Coordinates of the starting point of the section on each axis of the active plane
at the editor.
X2, Y2 Coordinates of the end point of the section on each axis of the active plane at
the editor.
Angle Angle of the profile with the abscissa axis.
Tangency Tangency with the previous section of the profile.
Data. Information
r1, 1 Radius and Polar angle of the section's starting point.
r2, 2 Radius and Polar angle of the section's end point.
Angle Angle of the profile with the abscissa axis.
Tangency Tangency with the previous section of the profile.
To Next Page
Loading...
