Operating manual.
CNC 8060
CNC 8065
16.
MDI/MDA MODE
Interface description.
·280·
(REF: 1807)
16.1.1 Softkey menus.
Horizontal softkey menu.
When selecting the full screen, the horizontal softkeys show the options related to this
window.
Softkey. Description.
New block. Initiate the editing of a new block.
Modify. Restore from the history the block selected with the cursor and insert
it in the edit line. This option is the same as pressing [ENTER].
Delete. Delete the block selected with the cursor.
Cancel edit. Cancel the editing of the block currently being edited. This option is
only available when editing a block.
Delete all. Delete all the blocks from the block history.
Save. Save the block history as an independent program.
Move up the block selected with the cursor.
Move down the block selected with the cursor.
To Next Page
Loading...
