Fagor CNC 8060 - Generating the Operating Terms Codes (Only for OEM)

Operating manual.
CNC 8060
CNC 8065
24.
DIAGNOSIS
Operating Terms.
·462·
(REF: 1807)
24.9.1 Generating the "Operating Terms” codes (only for OEM).
The "Operating Terms" program (independent of the CNC), governs the generation of the
code to activate, modify or cancel the temporary user license. This program does not create
any files, rather it crates an alphanumeric code that must be entered in the CNC. There is
one version of the program for Windows and another for Android. With the latter, the codes
may be generated on a smartphone using Android OS. To install the "Operating Terms" app
on an Android device, execute the file "AppOpertingterms.apk" on that device.
1. Execute the "Operating Terms" program (which generates the codes) and enter the
following data:
2. The program will display a screen with code of 14 numbers and letters.
Windows version. Android version.
 Hardware ID of the CNC. The code to activate or cancel the temporary user
license will only be associated with this hardware ID.
The CNC displays the hardware ID in the main window
in diagnosis mode (identified as ID4H) and in the
warnings and errors associated with the "Operating
Terms" .
 OEM KEY. This key is determined by the OEM and is only for the
"Operating Terms" program; it must not be confused
with the OEM password for the CNC. All operations with
a hardware ID on the CNC must have the same OEM
KEY. Once the temporary user license is active on a
CNC, the OEM KEY cannot be changed for that CNC.
The OEM KEY can have between 4 and 12 characters
(letters and numbers).
 Due date. Expiration date of the temporary user license.
 Cancellation code. Mark this option to generate the code to cancel the
temporary user license. If this option is selected, the
code generated will have the final date of 31/12/2077.
• To cancel the temporary user license, the OEM must have a record of the hardware ID of the CNC
and have a register of the OEM KEY used to generate the code.
• To change the expiration date of the temporary user license, the hardware ID and the OEM KEY
contained in the new code must match those of the CNC. In addition, the final date in the new code
must be later than the date of the active code on the CNC and later than the current date.
i
Windows version. Android version.