Operating manual.
CNC 8060
CNC 8065
3.
HOW TO OPERATE THE CNC
Calculator
·80·
(REF: 1807)
3.8 Calculator
The calculator may be accessed from any task window or directly using the key combination
[CTRL]+[K]. Press [ESC] to close the calculator.
The calculator may be accessed from any operating mode. When accessing from an editable
element, the result displayed by the calculator may be inserted. An editable element is any
element that may have a focus or cursor, such as the program editor, tables, editable data,
etc.
To insert the result, press the [INS] key. It closes the calculator and inserts the result in the
position that the cursor had when accessing the calculator.
The calculator looks like this
The calculator looks like this.
A Results window. It shows the result of the expression after accepting it with the [ENTER]
key. This value may be recovered with the "Acc" button so it can be used in later
calculations.
B Editing window. It shows the expression being defined. The expression may consist of
one or several operations that may be defined directly from the keyboard or with the
softkey menu options. The editing window saves the list of the last operations.
C Explorer window. It shows, at all times, the result from evaluating the expression being
defined. When selecting a portion of the expression at the edit window, it will show the
result from evaluating that portion.
The result from evaluating the expression may be:
Operations history
The expressions already accepted become part of the history and may be displayed using
the relevant keys [][]. After selecting an expression from the window, press the [ENTER]
key to recover it. The [ESC] key closes the history window.
OK: ########### Numeric.
OK: 1.#INF Infinite.
Error: <> Syntax error.
Wrong expression Wrong expression.
To Next Page
Loading...
