Fagor CNC 8060 - Page 3. Page to Display the Calculated Data

Operating manual.
CNC 8060
CNC 8065
26.
KINEMATICS CALIBRATION.
Kinematics calibration (Kinematic offsets).
·476·
(REF: 1807)
26.1.3 Page 3. Page to display the calculated data.
The CNC displays this page when the calibration process ends. This page shows the TDATA
values of the kinematics, the values of the machine parameters and the new calculated
values.
A Parameters of the kinematics.
B Parameter value, set at the machine parameters.
C Parameter value, calculated during the calibration.
D Maximum offset allowed for the parameter, set at the machine parameters.
E Parameter offset, set at the machine parameters.
F Parameter offset, calculated during the calibration.
A B C DD E F