Fagor CNC 8060 - Programs Service

Operating manual.
CNC 8060
CNC 8065
PLC
20.
"Programs" service
·343·
(REF: 1807)
20.2 "Programs" service
This service is used for managing the PLC project and its files.
PLC project
The PLC project is a set of files that, once compiled, generate the PLC program.
When selecting the PLC project, the softkey menu will show the options to manage that
project. Among these options, it is possible to add files to the PLC project and compile it.
Files of the PLC project
The PLC project may consist of several files edited in the following languages:
• Mnemonics or equations language (files with "plc" extension).
• Contac language (ladder diagram) (files with "ld" extension).
• C language (files with "c" extension).
The PLC project may consist of several files in the same language. Two files having the same
name and different extension cannot belong to the same project.
When selecting a file, the softkey menu shows the options to manage that file. Among these
options, it is possible to edit and monitor the file. These options will show the editing and
monitoring screens.
PLC project
Files making up the PLC project
Selecting the PLC project, it shows or hides the list of its files.