Operating manual.
CNC 8060
CNC 8065
9.
FMC (FAGOR MACHINING CALCULATOR).
Working with the FMC.
·200·
(REF: 1807)
9.4 Working with the FMC.
To calculate the proper cutting conditions using the FMC, follow these steps.
1 Choose a material and an operation and, if necessary, determine the material and the
operation from the corresponding screen. See
"9.2 Materials table." on page 198. See
"9.3 Operations table." on page 199.
2 Choose a tool from those listed by the FMC, whose type matches those on the tool table
for the selected operation. When choosing the tool, be aware that it must be suitable for
machining the selected material.
3 The FMC calculates the optimal cutting conditions (F and S) for the chosen material,
operation and tool. Select the remaining data to insert into the program (tool, comment,
etc.).
4 Press the “insert" softkey to insert blocks into the program.
9.5 Backup/Restore. Data backup copy.
The utilities mode may be used to make a backup of the CNC configuration (OEM and user
data) to be restored later one if necessary. When selecting the data to be included in a backup
or restore, the database containing the materials and operations added by the manufacturer
or user is in the Tables section under "User Data". See
"19.6 Data safety backup. Backup
- Restore" on page 337.
DANGER
If a tool is chosen that is not suitable for the selected material, there may be a risk of tool breakage
or "ejection risk".
The CNC only allows doing the backup or restore when there is no power (e.g. E-stop button pressed).
To Next Page
Loading...
