Operating manual.
CNC 8060
CNC 8065
3.
HOW TO OPERATE THE CNC
General description of the interface.
·64·
(REF: 1807)
3.1.1 Move the interface while dragging it with the mouse.
For 19" and 21" monitors, the CNC window may only cover a portion of the screen, thereby
leaving room for a keyboard or virtual jog panel. In this case, the user can move the interface
by using the mouse to click on the program status icon for the active channel, found on the
top status bar. Double click on this icon and the interface is positioned in the upper left corner
(POSX=0 POSY=0).
To Next Page
Loading...
