Operating manual.
CNC 8060
CNC 8065
HOW TO OPERATE THE CNC
3.
Operating modes
·71·
(REF: 1807)
Work modes and channels.
A multi-channel CNC system may have up to four channels; each of which constitutes a
different work environment that may act upon part of the CNC system or on the whole CNC
system. Some operating modes are specific for each channel whereas others are common
to all the channels (unique for the whole CNC).
The specific operating modes for each channel act independently from the rest of the
channels; for example, the automatic mode can execute a different program in each channel.
The common operating modes act on the whole CNC, affect all the channels; for example,
the PLC is common to the whole CNC.
Operation mode. Relationship with the channel.
Automatic mode The automatic mode is specific for each channel.
Manual (jog) mode The jog mode is specific for each channel.
MDI/MDA mode The MDI mode is specific for each channel.
EDISIMU mode
(editing and simulation)
The EDISIMU mode is specific for each channel.
User tables These tables are common to all the channels.
Tool table
Magazine table
These tables are common to all the channels.
Utilities mode The utilities mode is common to all the channels.
PLC The PLC mode is common to all the channels.
Machine parameters The machine parameters are common to all the channels.
Tuning mode
(Setup assistance).
The tuning mode is common to all the channels.
To Next Page
Loading...
