Operating manual.
CNC 8060
CNC 8065
20.
PLC
"Logic analyzer" service
·370·
(REF: 1807)
20.9.3 Execute and analyze trace
Execute trace / Stop trace
This softkey is used to start or stop the data capture to display the traces.
Analyze trace
• Go to the beginning
It moves the indicator cursor and the current graphic view to the beginning of the trace.
• Go to the end
It moves the indicator cursor and the current graphic view to the end of the trace.
• Go to the time
It moves the indicator cursor and the current graphic view to the time value set by the
operator with respect to the base point of the trace (starting point of the trace if there is
no trigger or to the trigger point if there is one).
• Go to trigger
It moves the indicator cursor and the current graphic view to the trigger point.
• Go to reference
It moves the indicator cursor and the current graphic view to the reference point defined
earlier.
• Set reference
It sets a reference point at the current cursor position for time difference calculation.
• Remove reference
Removes the reference point defined earlier.
Trace view / Edit view
This softkey toggles between the graphic window and the data and display conditions area.
MS (milliseconds) / US (microseconds)
This softkey toggles between milliseconds and microseconds.
Print
This softkey may be used to print the graphics in a printer connected to the CNC or as a file
(*.BMP format) at the CNC. When printing to a file, it is saved in the folder:
"C:\Cnc8070\Mtb\Plc\Watch\*.bmp"
20.9.4 Customize the appearance of the logic analyzer
It is used to customize the looks of the different elements of the logic analyzer. When
selecting this option, the CNC shows a dialog box with the options available for customizing.
This softkey is used to analyze the different graphic aspects of the trace. When selecting this
option, the softkey menu shows the options available for analyzing the trace. To return to the
main menu, press the [BACK] key.
To Next Page
Loading...
