Fagor CNC 8060 - Page 241

Operating manual.
CNC 8060
CNC 8065
GRAPHICS HD (·M· MODEL).
13.
Configuring and activating the sections.
·241·
(REF: 1807)
Activate the sections.
Each section may be activated individually.
To view the sections on the graphic, one must also enable the "View sections" option in the
window properties. See
"13.4 Configuring the graphics window (properties of each
window)." on page 239. If the "View sections" option is not enabled, the graphic does not
show any section even if they are active. If the "view sections" option is enabled, the diagram
shows the active sections.
Y
Z
X
Normal
Zn
0,9
Xn
0
Yn
0,5
Xn
Zn
70
30
Origin
Zo
0
Xo
70
Yo
50
50