Operating manual.
CNC 8060
CNC 8065
19.
UTILITIES MODE
Data safety backup. Backup - Restore
·338·
(REF: 1807)
OEM data.
• Machine parameters. Backup/restore of CNC machine parameters. The backup saves
the data in the BACKUP_OEM_MP.zip file.
In order for the CNC to properly do the backup and restore of the volumetric
compensation tables, it is recommended to save them in the folder ...MTB/SUB.
• Tables. Backup/restore of CNC tables; fixtures, zero offsets and arithmetic parameters.
The backup saves the data in the BACKUP_OEM_TABLES.zip file.
• Tools and tool magazines. Backup/restore of tool and tool magazine tables. The backup
saves the data in the BACKUP_OEM_MZTOOLS.zip file.
• Servo parameters. Backup/restore of drive machine parameters. The backup saves the
data in the BACKUP_OEM_DRIVEMP.zip file.
• Subroutines. Backup/restore of OEM subroutines. The backup saves the data in the
BACKUP_OEM_SUB.zip file.
• PLC. Backup/restore of the PLC; PLC programs, messages and errors. The backup
saves the data in the BACKUP_OEM_PLC.zip file.
• Configuration and screens. Backup/restore of CNC configuration and screens. The
backup saves the data in the BACKUP_OEM_CONFIG.zip file.
User data.
• Programs. Backup/restore of user programs, pockets, profiles, etc. The backup saves
the data in the BACKUP_USER_PRG.zip file. This backup includes the following folders.
• Tables. Backup/restore of CNC tables; FMC.
..\Users\Prg ..\Users\Pocket ..\Users\Profile ..\Users\CycleData
To Next Page
Loading...
