Fluke DSX-8000 - Chapter 11: The OptiFiber Pro OTDR Module; Overview of the OTDR Module

Chapter 9: Certify Fiber Cabling
Autotest in Smart Remote Mode
267
GPU118.EPS
Figure 112. Result for Smart Remote Mode
(Unsaved Bi-directional Results Shown)
 Connector icons show the number you entered for the TOTAL
CONNECTIONS setting on the No. of Connectors/Splices screen
(Figure 108 on page 257). For Figure 112, the TOTAL
CONNECTIONS setting is 4.
 The round icon shows the number of splices entered for the
SPLICES setting on the No. of Connectors/Splices screen.
 Bi-directional results show the fibers crossed at the main and
remote ports. The fibers show the connections as they are at the
end of the test.
 To see help for the screen, tap .
D
A
B
C
I
H
E
B
F
G