EasyManuals Logo

Foundry Networks FESX User Manual

Foundry Networks FESX
820 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #634 background imageLoading...
Page #634 background image
Foundry Configuration Guide for the FESX, FSX, and FWSX
21 - 62 © Foundry Networks, Inc. December 2005
Here is an example.
The aggregate-address command configures an aggregate address. The summary-only parameter prevents
the Layer 3 Switch from advertising more specific routes contained within the aggregate route. The show ip bgp
route command shows that the more specific routes aggregated into 209.1.0.0/16 have been suppressed. In this
case, the route to 209.1.44.0/24 has been suppressed. The following command indicates that the route is not
being advertised to the Layer 3 Switch’s BGP4 neighbors.
If you want to override the summary-only parameter and allow a specific route to be advertised to a neighbor,
enter commands such as the following:
The ip prefix-list command configures an IP prefix list for network 209.1.44.0/24, which is the route you want to
unsuppress. The next two commands configure a route map that uses the prefix list as input. The neighbor
command enables the Layer 3 Switch to advertise the routes specified in the route map to neighbor 10.1.0.2. The
clear command performs a soft reset of the session with the neighbor so that the Layer 3 Switch can advertise the
unsuppressed route.
Syntax: [no] neighbor <ip-addr> | <peer-group-name> unsuppress-map <map-name>
FESX424 Router(config-bgp-router)# aggregate-address 209.1.0.0 255.255.0.0
summary-only
FESX424 Router(config-bgp-router)# show ip bgp route 209.1.0.0/16 longer
Number of BGP Routes matching display condition : 2
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
Prefix Next Hop Metric LocPrf Weight Status
1 209.1.0.0/16 0.0.0.0 101 32768 BAL
AS_PATH:
2 209.1.44.0/24 10.2.0.1 1 101 32768 BLS
FESX424 Router(config-bgp-router)# show ip bgp route 209.1.44.0/24
Number of BGP Routes matching display condition : 1
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
Prefix Next Hop Metric LocPrf Weight Status
1 209.1.44.0/24 10.2.0.1 1 101 32768 BLS
AS_PATH:
Route is not advertised to any peers
FESX424 Router(config)# ip prefix-list Unsuppress1 permit 209.1.44.0/24
FESX424 Router(config)# route-map RouteMap1 permit 1
FESX424 Router(config-routemap RouteMap1)# match prefix-list Unsuppress1
FESX424 Router(config-routemap RouteMap1)# exit
FESX424 Router(config)# router bgp
FESX424 Router(config-bgp-router)# neighbor 10.1.0.2 unsuppress-map RouteMap1
FESX424 Router(config-bgp-router)# clear ip bgp neighbor 10.1.0.2 soft-out

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foundry Networks FESX and is the answer not in the manual?

Foundry Networks FESX Specifications

General IconGeneral
BrandFoundry Networks
ModelFESX
CategorySwitch
LanguageEnglish

Related product manuals