December 2005 © Foundry Networks, Inc. B - 1
Appendix B
Remote Network Monitoring
This appendix describes the remote monitoring features available on Foundry products:
Basic Management
The following sections contain procedures for basic system management tasks.
Viewing System Information
You can access software and hardware specifics for a Foundry Layer 2 Switch or Layer 3 Switch.
To view the software and hardware details for the system, enter the show version command:
FESX424 Router# show version
Syntax: show version
Table B.1: Chapter Contents
Description See Page
Basic Management – All Foundry products support basic
management tasks, such as viewing system and
configuration details.
B-1
Remote Monitoring (RMON) statistics – All Foundry
products support RMON statistics on the individual port
level.
B-5
sFlow – sFlow collects interface statistics and traffic
samples from individual interfaces on a Foundry device
and exports the information to a monitoring server.
B-9
Port Utilization – Displays the percentage of a given
uplink port’s bandwidth that is used by a specific list of
downlink ports.
B-17
To Next Page
Loading...
