Foundry Networks FESX User Manual

Foundry Configuration Guide for the FESX, FSX, and FWSX
20 - 48 © Foundry Networks, Inc. December 2005
Syntax: show ip ospf virtual-neighbor [<num>]
The <num> parameter displays the table beginning at the specified entry number.
Displaying OSPF Virtual Link Information
To display OSPF virtual link information, enter the following command at any CLI level:
FESX424 Router> show ip ospf virtual-link
Syntax: show ip ospf virtual-link [<num>]
The <num> parameter displays the table beginning at the specified entry number.
Displaying OSPF ABR and ASBR Information
To display OSPF ABR and ASBR information, enter the following command at any CLI level:
FESX424 Router> show ip ospf border-routers
Syntax: show ip ospf border-routers [<ip-addr>]
The <ip-addr> parameter displays the ABR and ASBR entries for the specified IP address.
Displaying OSPF Trap Status
All traps are enabled by default when you enable OSPF. To disable or re-enable an OSPF trap, see “Modify OSPF
Traps Generated” on page 20-34.
To display the state of each OSPF trap, enter the following command at any CLI level:
Syntax: show ip ospf trap
FESX424 Router> show ip ospf trap
Interface State Change Trap: Enabled
Virtual Interface State Change Trap: Enabled
Neighbor State Change Trap: Enabled
Virtual Neighbor State Change Trap: Enabled
Interface Configuration Error Trap: Enabled
Virtual Interface Configuration Error Trap: Enabled
Interface Authentication Failure Trap: Enabled
Virtual Interface Authentication Failure Trap: Enabled
Interface Receive Bad Packet Trap: Enabled
Virtual Interface Receive Bad Packet Trap: Enabled
Interface Retransmit Packet Trap: Enabled
Virtual Interface Retransmit Packet Trap: Enabled
Originate LSA Trap: Enabled
Originate MaxAge LSA Trap: Enabled
Link State Database Overflow Trap: Enabled
Link State Database Approaching Overflow Trap: Enabled

Foundry Networks FESX Specifications

General

Brand	Foundry Networks
Model	FESX
Category	Switch
Language	English