Remote Network Monitoring
December 2005 © Foundry Networks, Inc. B - 3
Table B.2: Port Statistics
This Line... Displays...
Port Configuration
Port The port number.
Link The link state.
State The STP state.
Dupl The mode (full-duplex or half-duplex).
Speed The port speed (10M, 100M, or 1000M).
Trunk The trunk group number, if the port is a member of a trunk group.
Tag Whether the port is a tagged member of a VLAN.
Priori The QoS forwarding priority of the port (level0 – level7).
MAC The MAC address of the port.
Name The name of the port, if you assigned a name.
Statistics
InOctets The total number of good octets and bad octets received.
OutOctets The total number of good octets and bad octets sent.
InPkts The total number of packets received. The count includes rejected
and local packets that are not sent to the switching core for
transmission.
OutPkts The total number of good packets sent. The count includes unicast,
multicast, and broadcast packets.
InBroadcastPkts The total number of good broadcast packets received.
OutBroadcastPkts The total number of good broadcast packets sent.
InMulticastPkts The total number of good multicast packets received.
OutMulticastPkts The total number of good multicast packets sent.
InUnicastPkts The total number of good unicast packets received.
OutUnicastPkts The total number of good unicast packets sent.
InBadPkts The total number of packets received for which one of the following is
true:
• The CRC was invalid.
• The packet was oversized.
• Jabbers: The packets were longer than 1518 octets and had a
bad FCS.
• Fragments: The packets were less than 64 octets long and had a
bad FCS.
• The packet was undersized (short).
To Next Page
Loading...
Need help?
General
