Policies and Filters
December 2000 C - 31
Syntax
Use the following CLI commands or Web management interface panels to configure IPX forwarding filters.
IPX RIP Filters
IPX RIP filters control the IPX routes that the Foundry device learns or advertises.
Actions
• An IPX RIP filter applied to inbound packets learns or drops IPX routes received on the port.
• An IPX RIP filter applied to outbound packets advertises or does not advertise IPX routes.
Scope
You configure IPX RIP filters globally, then apply them to specific ports.
Syntax
Use the following CLI commands or Web management interface panels to configure IPX RIP filters.
IPX SAP Filters
IPX Service Advertisement Protocol (SAP) filters control client access to IPX servers.
Actions
• An IPX SAP filter applied to inbound packets learns or drops advertisements for the specific services.
• An IPX SAP filter applied to outbound traffic advertises or does not advertise services.
Scope
You configure IPX SAP filters globally, then apply them to specific ports.
Syntax
Use the following CLI commands or Web management interface panels to configure IPX SAP filters.
Table C.17: IPX Forwarding Filters
CLI syntax Web management links
BigIron(config)# ipx forward-filter <filter-num> permit | deny
<source-network-number> | any <source-node-number> | any
<destination-network-number> | any <destination-node-number> | any
<destination-socket-number> | any
BigIron(config-if-1/1)# ipx forward-filter-group in | out <filter-list>
Configure->IPX->Forward Filter
Table C.18: IPX RIP Filters
CLI syntax Web management links
BigIron(config)# ipx rip-filter <filter-num> permit | deny
<network-number> | any <network-mask> | any
BigIron(config-if-1/1)# ipx rip-filter-group in | out <filter-list>
Configure->IPX->RIP Filter
Table C.19: IPX SAP Filters
CLI syntax Web management links
BigIron(config)# ipx sap-filter <filter-num> permit | deny
<server-type> | any <server-name> | any
BigIron(config-if-1/1)# ipx sap-filter-group in | out <filter-list>
Configure->IPX->SAP Filter