Foundry Switch and Router Installation and Configuration Guide
1 - 4 December 2000
How to Get Help
Foundry Networks technical support will ensure that the fast and easy access that you have come to expect from
your Foundry Networks products will be maintained.
Web Access
• http://www.foundrynetworks.com
Email Access
Technical requests can also be sent to the following email address:
• support@foundrynet.com
Telephone Access
• 1-877-TURBOCALL (887-2622) United States
• 408.586.1881 Outside the United States
Warranty Coverage
Contact Foundry Networks using any of the methods listed above for information about the standard and
extended warranties.
Enhanced software version
information
The show version and show flash commands provide more
information about the software on the device.
does not
affect this
document
New strict mode for ACL
processing of UDP traffic
You can configure a Foundry device to send all UDP packets to
the CPU for ACL comparison, instead of just the first UDP
packet with specific source and destination information.
13-23
New MIB tables for Adaptive
Rate Limiting
The Foundry MIB contains two new tables for port and VLAN
Adaptive Rate Limiting information.
• snPortCARTable – Contains port-related management
objects
• snVLanCARTable – Contains VLAN-related management
objects
The Foundry MIB is contained in the MIBxxxxx.mib file, where
xxxxx is the flash code version of the corresponding software
release. For example, MIB file MIB07105.mib corresponds
with software release 07.1.05.
does not
affect this
document
Enhancement Description See Page
To Next Page
Loading...
