Foundry Networks Switch and Router - Interface Ip Parameters

To Next Page

To Previous Page

Foundry Switch and Router Installation and Configuration Guide

15 - 18 December 2000

Interface IP Parameters – Layer 2 Switches

Table 15.4 lists the interface-level IP parameters for Layer 2 Switches.

Table 15.4: Interface IP Parameters – Layer 2 Switches

Parameter Description Default See page...

DHCP gateway

stamp

You can configure a list of DHCP stamp addresses for

a port. When the port receives a DHCP/BootP

Discovery packet from a client, the port places the IP

address(es) in the gateway list into the packet’s

Gateway field.

None configured 15-82

Foundry Networks Switch and Router - Interface Ip Parameters - Layer 2 Switches