Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
349
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
3 Click the [OK] button.
→ Registration of the FCoE port group starts.
4 Click the [Done] button to return to the [Port Group] screen.
9.2.3.5 Delete Port Group
This function deletes a port group. When a port group is deleted, the ports, which belong to the
port group, are also deleted.
The procedure to delete a port group is as follows:
1 Select the port group to be deleted (multiple selections can be made) and click
[Delete Port Group] in [Action].
→ A confirmation screen appears.
An error screen appears in the following conditions:
• When the port group name overlaps with an existing port group
name (port group names cannot overlap with any other port group
names, irrespective of the CA types.)
• When the total number of ports has exceeded the maximum
number for the ETERNUS DX Disk storage system
• When no ports are registered in a port group, or when nine or
more ports are registered in a port group
• When the specified port does not exist in the ETERNUS DX Disk
storage system
• When the port mode of the selected port is other than "FCoE"
• When there are ports of which affinity mode is enabled (On) and
disabled (Off) existing together
Port groups that are being used for the Host Affinity settings cannot be
deleted.
To Next Page
Loading...