Fujitsu Eternus web GUI - Page 363

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
363
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
• TCP Window Scale
Select the TCP Window scale of the target port between 0 and 14.
"TCP Window Scale" is a parameter that is used to specify the TCP window size.
Specify the "TCP Window Scale" in powers of two.
The relationship between the setting value and the TCP Window Scale is as follows:
● iSCSI Settings
• iSCSI Name
Enter the iSCSI name of the target port.
Click the [Default] button to set the default iSCSI name.
The following input conditions apply:
- Alphabetic characters (lower case) and numeric characters
- Symbols "-"(hyphen), "." (period) and ":"(colon)
- The name starts with "jpn." or "eui."
- Up to 223 characters
• Alias Name
Enter the alias name of the target port.
While the iSCSI name is a formal nomenclature that specifies the target iSCSI port, an
alias name is used as nickname.
An alias name that is the same as another port cannot be specified.
The following input condition applies:
- 1 - 31 alphanumeric characters
TCP Window Scale TCP Window size
0 32 KB
1 64 KB
2 128 KB
3 256 KB
4 512 KB
5 1024 KB
6 2048 KB
7 4096 KB
8 8192 KB
9 16384 KB
10 32768 KB
11 65536 KB
12 131072 KB
13 262144 KB
14 524288 KB
An iSCSI name is a unique name in the ETERNUS DX Disk
storage system. The same iSCSI name cannot be set to multiple
iSCSI ports except the device iSCSI name.