Fujitsu Eternus web GUI - Page 40

Chapter 3 Initial Setup
3.1 Initial Setup 1
ETERNUS Web GUI User’s Guide
40
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
9 Proceed to [Set Network Environment].
9-1 Specify the following items, and click the [Next] button.
- Select Network Port
- Interface
- Allowed IP List
→ A confirmation screen appears.
9-2 Click the [OK] button.
→ Setting of the network environment starts.
9-3 Click the [Finish] button.
→ A completed screen appears.
Click the [Skip] button to proceed to the next screen without
setting.