Chapter 10 Component Management
10.1 Component Status
ETERNUS Web GUI User’s Guide
400
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
- Type
The drive type is displayed.
• For 2.5-inch SAS disks: 2.5" Online
• For 3.5-inch SAS disks: 3.5" Online
• For 3.5-inch Nearline SAS disks: 3.5" Nearline
• For 2.5-inch SSD: 2.5" SSD
• For 3.5-inch SSD: 3.5" SSD
- Usage
The usage of the drive is displayed.
• Disk
• Data
• Unused
• System
• Global Hot Spare
• Dedicated Hot Spare
- RAID Group
If the drive is registered in a RAID group, the RAID group name to which the drive belongs
is displayed.
By clicking this item, the [RAID Group] screen is displayed.
The RAID group name cannot be clicked when logged on via a Slave CM.
● For ETERNUS DX410 S2/DX440 S2
The following items are displayed in the Main area:
- Device image
The front view of the CE that is installed in the ETERNUS DX Disk storage system is
displayed.
The Battery Unit (BTU) status and the Battery Charger Unit (BCU) status are displayed
with icons.
By clicking the BTU, the [BTU] screen is displayed.
By clicking the BCU, the [BCU] screen is displayed.
To Next Page
Loading...