Fujitsu Eternus web GUI - Page 469

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
469
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
The procedure to change the SNMP Agent MIB view is as follows:
Procedure
1 Click [Setup SNMP MIB View] in [Action].
2 Click the [Add] button.
3 Input or edit the MIB View, and click the [OK] button.
• View Name
Input the MIB View name.
The view name which has already been used cannot be entered.
The following input conditions apply:
- 1 - 32 alphanumeric characters and symbols
- "! (exclamation mark)", "# (hash mark)", "& (ampersand)", "_ (underscore)", "+
(plus)", "- (hyphen)", "* (asterisk)" and "/ (slash)" can be used
- Spaces
• If the "SNMP Function" is disabled, the [Setup SNMP Agent Manager]
function cannot be used.
• The view name that is used in the settings in "11.2.3.6 Setup SNMP
Agent User" (page 471) or "11.2.3.6 Setup SNMP Agent User" (page
471) cannot be changed or deleted.
• The default view can be changed or deleted.
Click the [View Name] link to edit the existing MIB View.