Fujitsu Eternus web GUI - Page 479

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
479
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ Return to the original screen.
4 Repeat Step 2 and Step 3 to configure multiple traps.
5 After adding or editing the trap information, click the [Set] button.
→ A confirmation screen appears.
In the following conditions, an error screen appears:
• When "Manager No. " or "Community Name/User Name" is not
entered
• When a trap with the same parameters (except the "Trap No. ")
exists
• When a trap with the same parameters (except the "Trap No. "
and the "Port No. ") exists