© 2011 Fujitsu Technology Solutions
123
9.2.7.3 Port Summary
Figure : Port Summary Statistics
Selection Criteria
Ubit/Slot/Port - Selects the interface for which data is to be displayed or configured.
Non-Configurable Data
ifIndex - This object indicates the ifIndex of the interface table entry associated with this port on an
adapter.
Total Packets Received Without Errors - The total number of packets received that were without
errors.
Packets Received With Error - The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.
Broadcast Packets Received - The total number of good packets received that were directed to the
broadcast address. Note that this does not include multicast packets.
Packets Transmitted Without Errors - The number of frames that have been transmitted by this
port to its segment.
Transmit Packet Errors - The number of outbound packets that could not be transmitted because
of errors.
Transmit Packets Discarded - The best estimate of the total number of collisions on this Ethernet
segment.
Time Since Counters Last Cleared - The elapsed time, in days, hours, minutes, and seconds since
the statistics for this port were last cleared.
Command Buttons
Clear Counters - Clear all the counters, resetting all statistics for this port to default values.
Clear All Counters - Clear all the counters for all ports, resetting all statistics for all ports to default
values.
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...
