Fujitsu PRIMERGY BX900 - System Log Management Commands; Show Commands

© 2011 Fujitsu Technology Solutions
599
10.7 System Log Management Commands
10.7.1 Show Commands
10.7.1.1 show logging
This command displays logging.
Syntax
show logging
Default Setting
None
Command Mode
Privileged Exec
Display Message
Logging Client Local Port: The port on the collector/relay to which syslog messages are sent
CLI Command Logging: The mode for CLI command logging.
Hide Password: The mode for hiding password command logging.
Console Logging: The mode for console logging.
Console Logging Severity Filter: The minimum severity to log to the console log. Messages with an
equal or lower numerical severity are logged.
Buffered Logging: The mode for buffered logging.
Syslog Logging: The mode for logging to configured syslog hosts. If set to disable logging stops to all
syslog hosts.
Terminal monitor: The mode for terminal logging.
Terminal Logging Severity Filter: The minimum severity to log to the terminal log. Messages with an
equal or lower numerical severity are logged.
Log Messages Received: The number of messages received by the log process. This includes
messages that are dropped or ignored
Log Messages Dropped: The number of messages that could not be processed.
Log Messages Relayed: The number of messages that are relayed.
Log Messages Ignored: The number of messages that are ignored.