Fujitsu PRIMERGY BX900 - Cos Commands; Show Commands

© 2011 Fujitsu Technology Solutions
782
10.19 CoS Commands
10.19.1 Show Commands
10.19.1.1 show queue cos-map
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes for a specific
interface. The slot/port parameter is optional and is only valid on platforms that support independent
per-port class of service mappings. If specified, the 802.1p mapping table of the interface is displayed. If
omitted, the most recent global configuration settings are displayed.
Syntax
show queue cos-map <slot/port>
<slot/port> The interface number.
Default Setting
None
Command Mode
Privileged EXEC, User EXEC
Display Message
The following information is repeated for each user priority.
User Priority: The 802.1p user priority value.
Traffic Class: The traffic class internal queue identifier to which the user priority value is mapped.