Fujitsu PRIMERGY BX900 - LDAP Commands

© 2011 Fujitsu Technology Solutions
726
10.16.7 LDAP Commands
10.16.7.1 show ldap
This command is used to display the current LDAP configuration.
Syntax
show ldap
Default Setting
None
Command Mode
Privileged Exec
Display Message
Server IP: LDAP server IP, default is 0.0.0.0.
Server Port: LDAP server TCP port, default is 389.
baseDn: Base distinguished name, default is empty string.
RacName: RDN attribute of bind DN, default is empty string.
RacDomain: Partial bind DN exclude RDN with it, default is empty string.
10.16.7.2 ldap ip
This command is used to configure LDAP server IP.
Syntax
ldap ip <ipaddr>
no ldap ip
<ipaddr> - The IP address.
no - This command is used to return the IP address to the default value.
Default Setting
0.0.0.0
Command Mode
Global Config