Fujitsu PRIMERGY BX900 - Quit

© 2011 Fujitsu Technology Solutions
640
10.9.17 do
This command is used to execute Privileged EXEC-level command from global configuration mode or any
configuration sub-mode.
Syntax
do [EXEC-level command]
[EXEC-level command] - Privileged EXEC-level command in Privileged Exec Command Mode.
Default Setting
None
Command Mode
Global Config, any configuration submode
10.9.18 quit
This command is used to exit a CLI session.
Syntax
quit
Default Setting
None
Command Mode
Privileged Exec