Fujitsu PRIMERGY BX900 - Show Logging Buffered

© 2011 Fujitsu Technology Solutions
600
10.7.2 show logging buffered
This command displays the message log maintained by the switch. The message log contains system
trace information.
Syntax
show logging buffered
Default Setting
None
Command Mode
Privileged Exec
Display Message
Buffered (In-Memory) Logging: Display the message log is enabled or disabled.
Buffered Logging Wrapping Behavior: Display the wrapping behavior is enabled or not.
Buffered Log Count: Display how many messages have been logged.
Message: The message that has been logged.
!
Message log information will not be retained across a switch reset.