Fujitsu PRIMERGY BX900 - Configuration Commands

© 2011 Fujitsu Technology Solutions
786
10.19.2 Configuration Commands
10.19.2.1 queue cos-map
This command maps an 802.1p priority to an internal traffic class on a "per-port" basis.
Syntax
queue cos-map <priority> <queue-id>
no queue cos-map
<priority> - The range of queue priority is 0 to 7.
<queue-id> - The range of mapped traffic class is 0 to 7.
no - Reset to the default mapping of the queue priority and the mapped traffic class.
i
The range of mapped traffic class is 0 to 6 for the stackable connection blade.
Default Setting
None
Command Mode
Interface Config.
This command maps an 802.1p priority to an internal traffic class for a device.
Syntax
queue cos-map all <priority> <queue-id>
no queue cos-map all
<priority> - The range of queue priority is 0 to 7.
<queue-id> - The range of mapped traffic class is 0 to 7.
no - Reset to the default mapping of the queue priority and the mapped traffic class.
i
The range of mapped traffic class is 0 to 6 for the stackable connection blade.
Default Setting
None
Command Mode
Global Config.