Fujitsu PRIMERGY BX900 - Configuration Commands

© 2011 Fujitsu Technology Solutions
685
10.14.2 Configuration Commands
This command is to Enable/Disable the port backup admin mode. Use ‘port-backup’ to enable the admin
mode of function, and use no command to disable the function.
Syntax
port-backup
no port-backup
no - This command disable port backup admin mode.
Default Setting
None
Command Mode
Global Config
This command is to Create/Destroy the port backup group. Use ‘port-backup group’ to create a group. Use
no command to destroy the group.
Syntax
port-backup group
no port-backup <group id>
<group id> - port backup group id (Range: 1~32).
no - This command destroy a port backup group.
Default Setting
None
Command Mode
Global Config