Fujitsu PRIMERGY BX900 - Status of Leds

© 2011 Fujitsu Technology Solutions
36
2.2.3 Status of LEDs
The front panel contains light emitting diodes (LED) that indicate the status of links, and Ethernet
Connection Blade diagnostics.
Port LEDs
Each of uplink port has two LED indicators.
RJ45:
LED Color Function
LED-A
(Speed)
Orange Port Link at 1000 Mbps
Green Port Link at 100 Mbps
Off Port Link at 10 Mbps
LED-B
(Link/Activity)
Green Network Link
Green Blink Network Activity
Off No Network Link or port disable
SFP:
LED Color Function
LINK Off No Network Link or port disable
Green SFP transceiver link status.
Green Blink SFP transceiver active status.
ERR Off No SFP error
Orange SFP transceiver error
Orange Blink SFP module not supported
SFP+:
LED Color Function
LINK
Off No Network Link or port disable
Green SFP+ transceiver link status.
Green Blink SFP+ transceiver active status.
ERR
Off No SFP+ error
Orange SFP+ transceiver error
Orange Blink SFP+ module not supported