© 2011 Fujitsu Technology Solutions
299
9.4.5 TACACS+
9.4.5.1 Config
Figure : TACACS+ Config
Configurable Data
Key String - Specifies the authentication and encryption key for TACACS+ communications
between the device and the TACACS+ server. The valid range is 0-128 characters. The key must
match the key configured on the TACACS+ server.
Encrypted - When the key string is encrypted, this box need to be checked. This field is only
displayed if the user has READWRITE access.
Connection Timeout - The maximum number of seconds allowed to establish a TCP connection
between the device and the TACACS+ server.
Command Buttons
Apply - Send the updated screen to the switch and cause the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
To Next Page
Loading...
