Fujitsu PRIMERGY BX900 - Domain Name Server Relay Commands

© 2011 Fujitsu Technology Solutions
554
10.6.12 Domain Name Server Relay Commands
10.6.12.1 Show Commands
10.6.12.1.1 show hosts
This command displays the static host name-to-address mapping table.
Syntax
show hosts
Default Setting
None
Command Mode
Privileged Exec
Display Message
Domain Name List: Domain Name.
IP Address: IPv4/IPv6 address of the Host.
10.6.12.1.2 show dns
This command displays the configuration of the DNS server.
Syntax
show dns
Default Setting
None
Command Mode
Privileged Exec
Display Message
Server Name: The ddns’s provider name.
Default Domain Name: The default domain name that will be used for querying the IP address of a
host.
Domain Name List: A list of domain names that will be used for querying the IP address of a host.
Name Server List: A list of domain name servers, including IPv4 and IPv6.
Request: Number of the DNS query packets been sent.
Response: Number of the DNS response packets been received.