© 2011 Fujitsu Technology Solutions
578
10.6.17 LLDP Commands
10.6.17.1 show lldp
This command uses to display a summary of the current LLDP configuration.
Syntax
show lldp
Default Setting
None
Command Mode
Privileged Exec
Display Message
Transmit Interval: Shows how frequently the system transmits local data LLDP frames, in seconds.
Transmit Hold Multiplier: Shows the multiplier on the transmit interval that sets the TTL in local data
LLDP frames.
Re-initialization Delay: Shows the delay before re-initialization, in seconds.
Notification Interval: Shows how frequently the system sends remote data change notifications, in
seconds.
Transmit Delay: Show the delay between successive LLDP frame transmissions, in seconds.
To Next Page
Loading...
