Fujitsu PRIMERGY BX900 - Page 581

© 2011 Fujitsu Technology Solutions
579
10.6.17.2 show lldp interface
This command uses to display a summary of the current LLDP configuration for a specific interface or for
all interfaces.
Syntax
show lldp interface {<slot/port> | all}
<slot/port> - Configs a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Shows the interface in a slot/port format.
Link: Shows whether the link is up or down.
Transmit: Shows whether the interface transmits LLDP frames.
Receive: Shows whether the interface receives LLDP frames.
Notify: Shows whether the interface sends remote data change notifications.
TLVs: Shows whether the interface sends optional TLVs in the LLDP frames. The TLV codes can be 0
(Port Description), 1 (System Name), 2 (System Description), or 3 (System Capability).
Mgmt: Shows whether the interface transmits system management address information in the LLDP
frames.