Fujitsu PRIMERGY BX900 - Whichboot

© 2011 Fujitsu Technology Solutions
630
10.9.5 whichboot
This command is used to display which files were booted when the system powered up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec
Display Message
Boot-System: Current boot mode.
Next Booting Mode: Next boot mode after reboot.
file name: name of the configuration or image file.
file type: Boot-Rom image, Operation Code or Configuration file.
startup: use in booting
size (byte): size of the configuration or image file.