© 2011 Fujitsu Technology Solutions
49
5.2 Connecting the Ethernet Connection Blade Module
Before configuring the Ethernet Connection Blade Module, PRIMERGY BX400/BX900 Blade Server
console port must be connected to the Ethernet Connection Blade Module. To connect PRIMERGY
BX400/BX900 Blade Server console port to Ethernet Connection Blade Module, perform the following:
1. Mount the Ethernet Connection Blade Module
One the console monitor the MMB application displays a login screen.
The Ethernet Connection Blade Module bootup screen is displayed.
Welcome to Management Blade 1.30J
<Username>:
2. Enter the provided username and password. The console menu is displayed.
Welcome to Management Blade 1.30J
<Username>:admin
<Password>:*****
+-----------------------------------------------------------------------------+
| Console Menu page_root
+-----------------------------------------------------------------------------+
(1) Management Agent
(2) Emergency Management Port
(3) Console Redirection
(4) TFTP update
(5) Logout
(6) Reboot Management Blade
(7) System Information Dump
(8) Command Line Interface
(9) Account Management
Enter selection: 3
To Next Page
Loading...
