© 2011 Fujitsu Technology Solutions
57
5.6.2 In BootROM Back Door CLI
Software Download Using Xmodem Protocol
The software download procedure is performed when a new version must be downloaded to replace the
corrupted files, update or upgrade the system software (system and boot images).
To download software from the BootROM CLI:
1. Form the BootROM CLI prompt input the following command: xmodem –rb <filename>
2. When using the HyperTerminal, click Transfer on the HyperTerminal Menu Bar.
3. In the Filename field, enter the file path for the file to be downloaded.
4. Ensure that the Xmodem protocol is selected in the Protocol field.
5. Press Send. The software is downloaded.
Erasing the Device Configuration
1. From the BootROM CLI prompt input the following command:
delete <configuration filename>
The following message is displayed:
Are you sure you want to delete <configuration filename> (y/n)?
2. Press Y. The following message is displayed.
Updating partition table, please wait … Done
Image file <configuration filename> deleted.
3. Repeat the device initial configuration.
Boot Image Download
Loading a new boot image using Xmodem protocol and programming it into the flash updates the boot
image. The boot image is loaded when the device is powered on. A user has no control over the boot
image copies. To download a boot image using xmodem protocol:
1. Ensure that the file to be downloaded is saved on the PC host (the image file).
2. Enter BootROM> dir –l command to verify which software version is currently running on the device.
The following is an example of the information that appears:
BootROM > dir -l
type zip def date version name
-------------------------------------------------------------------------------
loader none yes 2008/12/14 0.4 sb11a-l-0.4.1214.bin
bootrom gzip yes 2008/12/14 0.4 sb11a-b-0.4.1214.biz
runtime gzip yes 2008/12/10 0.5 sb11a-sw-r-0.5.1210.biz
To Next Page
Loading...
