Fujitsu PRIMERGY BX900 - Description of Hardware; Port Configurations of Ethernet Connection Blade Module

© 2011 Fujitsu Technology Solutions
33
2.2 Description of Hardware
2.2.1 Port Configurations of Ethernet Connection Blade Module
The PRIMERGY BX400/BX900 Ethernet Connection Blade Module contains
a) SB11: 8 Gigabit Ethernet ports and two 10G SFP+ Ethernet ports for connecting to the network and
one internal CX4 HiGig/HiGig+ port and one external CX4 HiGig/HiGig+ ports for stacking purpose,
b) SB11a: 8 RJ45 Gigabit Ethernet ports and 4 SFP Gigabit Ethernet ports for connecting to network.
c) SB6: 6 RJ-45 Gigabit Ethernet ports for connecting to network. It has one Out-of-Band management
Ethernet port for connecting PRIMERGY
It has one Out-of-Band management Ethernet port for connecting PRIMERGY BX900 Blade Server
management MMB modules.
Physical Ports for SB11
• 36 1-Gigabit downlink ports
• 8 1-Gigabit RJ-45 ports for uplink ports
• 2 10-Gigabit SFP+ ports for uplink
• 2 HiGig/HiGig+ ports for stacking up to 8 devices. One is the internal stacking for the system
mid-plane, the other is for the external stack
Figure: PRIMERGY BX900 GbE Connection Blade 36/8+2 Stacking (SB11) Front Panel
Physical Ports for SB11a
• 36 1-Gigabit downlink ports
• 8 1-Gigabit RJ-45 ports for uplink ports
• 4 1-Gigabit SFP ports for uplink
Figure: PRIMERGY BX900 GbE Connection Blade 36/12 Stacking (SB11a) Front Panel