© 2011 Fujitsu Technology Solutions
302
9.4.6 LDAP
9.4.6.1 Config
Figure : LDAP Config
Operation
If RDN(Relative Distinguished Name) attribute is "cn"(common name), and bind DN(Distinguished
Name) without RDN is "dc=test,dc=com". User name is "root", and password is "1234".Then the bind
DN is "cn=root,dc=test,dc=com", and password is "1234". (OU stands for "Organization Unit". DC
stands for "Domain Component".)
Configurable Data
IP Address - LDAP server IP, default is 0.0.0.0.
Port - LDAP server TCP port, default is 389.
Base DN - Base distinguished name, default is empty string.
RDN attribute - RDN attribute of bind DN, default is empty string.
Bind DN without RDN - Partial bind DN exclude RDN with it, default is empty string.
Command Buttons
Apply - Update the LDAP configuration with the values you entered. If you want the switch to retain
the new values across a power cycle you must perform a save.
To Next Page
Loading...
