Fujitsu PRIMERGY BX900 - Spanning Tree

© 2011 Fujitsu Technology Solutions
252
9.3.20 Spanning Tree
!
This function is only provided on Switch mode.
9.3.20.1 Switch Config/Status
Figure : Spanning Tree Switch Config/Status
Selection Criteria
Spanning Tree Mode - Specifies whether spanning tree operation is enabled on the switch. Value is
enabled or disabled
Spanning Tree Forward BPDU - Specifies whether spanning tree forward BPDU is enabled on the
switch. Value is enabled or disabled
Force Protocol Version - Specifies the Force Protocol Version parameter for the switch. The
options are IEEE 802.1d, IEEE 802.1w and IEEE 802.1s
Edgeport BPDU Filter - Specifies whether Edgeport BPDU Filter is enabled on the switch. Value is
enabled or disabled
Edgeport BPDU Guard - Specifies whether Edgeport BPDU Guard is enabled on the switch. Value
is enabled or disabled
Uplink Fast - Specifies whether Uplink Fast is enabled on the switch. Value is enabled or disabled
Configurable Data
Configuration Name- Identifier used to identify the configuration currently being used. It may be up
to 32 alphanumeric characters
Configuration Revision Level - Identifier used to identify the configuration currently being used.
The values allowed are between 0 and 65535. The default value is 0.