© 2011 Fujitsu Technology Solutions
204
9.3.7 GARP
9.3.7.1 Global Config
Figure : GARP Global Config
i
It can take up to 10 seconds for GARP configuration changes to take effect.
Selection Criteria
GVRP Mode - Choose the GARP VLAN Registration Protocol administrative mode for the switch by
selecting enable or disable from the pull down menu. The factory default is disable.
GMRP Mode - Choose the GARP Multicast Registration Protocol administrative mode for the switch
by selecting enable or disable from the pull down menu. The factory default is disable.
Command Buttons
Apply - Update the switch with the values you entered. If you want the switch to retain the new
values across a power cycle you must perform a save..
To Next Page
Loading...
