Fujitsu PRIMERGY BX900 - End-Host-Mode Commands; Show Commands

© 2011 Fujitsu Technology Solutions
797
10.21 End-Host-Mode Commands
10.21.1 Show Commands
10.21.1.1 show pin-group
Display information for all pin-group or a specific pin-group.
Syntax
show pin-group [<pinGroupName>]
Display Messages:
Auto VLAN Uplink Synchronization: Enable of Disable.
Pin-Group Name: Specifies the name of a pin-group.
Uplink Ports: Specifies the uplink ports of a pin-group.
Downlink Ports: Specifies the downlink ports of a pin-group.
Default Setting
None
Command Mode
Privileged Exec