Fujitsu PRIMERGY BX900 - Page 800

© 2011 Fujitsu Technology Solutions
798
10.21.1.2 show pin-group <pinGroupName> detail
Display detailed information of a specific pin-group.
Syntax
show pin-group [<pinGroupName>] detail
Display Messages:
Auto VLAN Uplink Synchronization: Enable or Disable.
Pin-Group Name: Specifies the name of a pin-group.
Downlink Ports: Specifies the downlink ports of a pin-group.
Selected Interface: Specifies the selected pin interface of a downlink port.
Pin State: Specifies the pin state of a downlink port.
Idle: Pinning process is not initiated.
Pinned: This downlink port has been selected a uplink port as its pinned interface.
Not Pinned: The VLAN configuration is mismatched between this downlink port and all uplink ports.
Disable: The downlink interface is not participating the pinning state.
Default Setting
None
Command Mode
Privileged Exec